Avionics / Panel: Difference between revisions

From RV10 Community Wiki
Jump to navigation Jump to search
VisualWikitext
Line 24: Line 24:
* [https://support.garmin.com/en-US/aviation/issue/tabs/manuals?identifier=63892 2D CAD-Files from Garmin] ''(DXF-format)''
* [https://support.garmin.com/en-US/aviation/issue/tabs/manuals?identifier=63892 2D CAD-Files from Garmin] ''(DXF-format)''
* [https://static.garmin.com/pumac/g3xstepfiles3.zip 3D CAD-Files from Garmin] ''(Step-format, most G3X, Audio and GPS instruments)''
* [https://static.garmin.com/pumac/g3xstepfiles3.zip 3D CAD-Files from Garmin] ''(Step-format, most G3X, Audio and GPS instruments)''
* [https://cad.onshape.com/documents/58051049bcf3496072fa946a/w/9ee1ac39aaf6c431fe3bdfbb/e/7da1ba6f479ce5ebfb6215e3?renderMode=0&uiState=623d448c57fedd6b81806173 Martin's CAD-designed Panel]<br>[[File:RV10_CAD.png|400px|link=https://cad.onshape.com/documents/58051049bcf3496072fa946a/w/9ee1ac39aaf6c431fe3bdfbb/e/7da1ba6f479ce5ebfb6215e3?renderMode=0&uiState=623d448c57fedd6b81806173]]<br>''Hint: Create an account and clone the project. OnShape is free if your files are public.<br>Web-based CAD software, no install necessary.<br>Use right mouse-button or two finger drag to rotate the panel.<br>For iPhone and iPad, install OnShape app.''
* [https://cad.onshape.com/documents/58051049bcf3496072fa946a/w/9ee1ac39aaf6c431fe3bdfbb/e/7da1ba6f479ce5ebfb6215e3?renderMode=0&uiState=623d448c57fedd6b81806173 Martin's CAD-designed Panel]<br>[[File:RV10_CAD.png|400px|link=https://cad.onshape.com/documents/58051049bcf3496072fa946a/w/9ee1ac39aaf6c431fe3bdfbb/e/7da1ba6f479ce5ebfb6215e3?renderMode=0&uiState=623d448c57fedd6b81806173]]<br>''Hints:<br>
** Create an account and clone the project. OnShape is free if your files are public.
** Web-based CAD software, no install necessary.
** Use right mouse-button or two finger drag to rotate the panel.
** For iPhone and iPad, install OnShape app.''
* Cutting Services<br>[[File:panel.png|400px]]<br>Above panel laser cut: 0.040 6061:$54, 0.025 2024T3:$182 at [https://www.waterjetwest.com sendcutsend.com]<br>$100 waterjet cut, e.g. at [https://www.waterjetwest.com/ waterjetwest.com]
* Cutting Services<br>[[File:panel.png|400px]]<br>Above panel laser cut: 0.040 6061:$54, 0.025 2024T3:$182 at [https://www.waterjetwest.com sendcutsend.com]<br>$100 waterjet cut, e.g. at [https://www.waterjetwest.com/ waterjetwest.com]
* Black Level 2 Anodizing<br>[[File:black_anodized_panel.jpeg|400px]]<br>e.g. $130 (minimum order value) at [https://miramarmetalprocessing.com/ miramarmetalprocessing.com]
* Black Level 2 Anodizing<br>[[File:black_anodized_panel.jpeg|400px]]<br>e.g. $130 (minimum order value) at [https://miramarmetalprocessing.com/ miramarmetalprocessing.com]

Revision as of 05:51, 27 March 2022

Do's and Don'ts

  • Don't remove any material from the ribs supporting the glare shield. You need to place the instruments so that they go left, right or underneath the ribs.
  • Don't remove the lowest part of the sub-panel to accommodate GPS units (the bottom part with its flange is structural). Rather cut a rectangular hole for the GPS with rounded corners to avoid stress into the sub-panel and reinforce the cut-out with angle brackets as mentioned in the build manual.
  • Don't put your backup attitude indicator (e.g. a G5) out of sight (on the copilot side, down on the center console)
  • Don't put your IFR-certified GPS out of sight (more than 45 degrees to the right, more than 30 degrees down), unless you install a full annunciator panel in sight.

Panel Builders

Avionics Dealerships

Making Your Own Panel

Retrieved from "https://rv10.org/index.php?title=Avionics_/_Panel&oldid=354"