SECTION 34: BAGGAGE DOOR: Difference between revisions
Jump to navigation
Jump to search
m (→Hints) |
m (→Hints) |
||
| Line 4: | Line 4: | ||
=== Hints === | === Hints === | ||
* [https://www.youtube.com/watch?v=bqsJr1VQ76I Ed's video on how to make the door removable]<br>Note: you will need more hinge pin length than with the stock setup. Consider securing the ends of the pins with a safety wire. Should they come loose and you close the door, they might try to punch new holes.<br>[[File:2023-12-13 20-19-03.jpg|533x533px]]<br>Split hinge pin with safety wires. | * [https://www.youtube.com/watch?v=bqsJr1VQ76I Ed's video on how to make the door removable]<br>Note: you will need more hinge pin length than with the stock setup. | ||
* Consider securing the ends of the pins with a safety wire. Should they come loose and you close the door, they might try to punch new holes.<br>[[File:2023-12-13 20-19-03.jpg|533x533px]]<br>Split hinge pin with safety wires. | |||
==== Page 34-6 ==== | ==== Page 34-6 ==== | ||
Revision as of 06:45, 14 December 2023
Build Instruction Updates
- N/A
Check for more recent updates here
Hints
- Ed's video on how to make the door removable
Note: you will need more hinge pin length than with the stock setup. - Consider securing the ends of the pins with a safety wire. Should they come loose and you close the door, they might try to punch new holes.
Split hinge pin with safety wires.
Page 34-6
- Step 4 - see Door_Locks_/_Hinges_/_Handles for weather strip options.
- Step 5 - You may not be able to reach the upper two rivets from the backside. Consider using two CCR-264SS-3-2 pull rivets. The AN470AD4-5 and AN470AD4-7 rivets on top are hard to reach, consider using pull rivets (Note: LP4-3s are not long enough to replace a 4-7) or use full rivets and a 12 inch back rivet set.