SECTION OP-56: TAIL LIGHTING: Difference between revisions
Jump to navigation
Jump to search
No edit summary |
mNo edit summary |
||
| (8 intermediate revisions by 2 users not shown) | |||
| Line 1: | Line 1: | ||
=== Build Instruction Updates === | |||
* The suggested hole to bring the tail light cable into the fuselage is above the bottom rudder hinge in OP-56. In the obsolete RV-10 electrical wiring instructions (OP-37), the hole was shown below the hinge. Many builders have used the lower hole placement without issues and the upper hole is at a place where the leading edge of the rudder doesn't leave much space:<br>[[File:Tail light cable1.jpg|200px]]<br>Photo by J. Tremble | * 09/24/19 [https://www.vansaircraft.com/wp-content/uploads/2019/09/OP-56-Tail-Lighting.pdf OP-56-Tail-Lighting.pdf] | ||
Check for more recent updates [https://www.vansaircraft.com/service-information-and-revisions/?aircraft=rv-10&doctype=revisions-changes&sort=date here] | |||
=== Hints === | |||
* The suggested hole to bring the tail light cable into the fuselage is above the bottom rudder hinge in OP-56. In the obsolete RV-10 electrical wiring instructions (OP-37), the hole was shown below the hinge. Many builders have used the lower hole placement without issues and the upper hole is at a place where the leading edge of the rudder doesn't leave much space:<br>[[File:Tail light cable1.jpg|200px]]<br>''Photo by J. Tremble'' | |||
* See also discussions | * See also discussions | ||
** FB Post [https://www.facebook.com/groups/794208517366916 6/1/2022] | |||
** FB Post [https://www.facebook.com/groups/vansrv10/posts/4886917024762691 3/31/2022] | ** FB Post [https://www.facebook.com/groups/vansrv10/posts/4886917024762691 3/31/2022] | ||
** FB Post [https://www.facebook.com/groups/vansrv10/posts/4883530028434724 3/29/2022] | ** FB Post [https://www.facebook.com/groups/vansrv10/posts/4883530028434724 3/29/2022] | ||
** FB Post [https://www.facebook.com/groups/vansrv10/posts/2567889603332123 12/24/2019] | ** FB Post [https://www.facebook.com/groups/vansrv10/posts/2567889603332123 12/24/2019] | ||
*A tail light is not needed if the wing tips have white rear position lights as on the Aveo Ziptips. See CFR title 14 volume 1 section 23.1385 (c): Rear position light. The rear position light must be a white light mounted as far aft as practicable on the tail '''or on each wing tip'''. | |||
[[Category:Hints]] | |||
Latest revision as of 10:46, 23 November 2023
Build Instruction Updates
- 09/24/19 OP-56-Tail-Lighting.pdf
Check for more recent updates here
Hints
- The suggested hole to bring the tail light cable into the fuselage is above the bottom rudder hinge in OP-56. In the obsolete RV-10 electrical wiring instructions (OP-37), the hole was shown below the hinge. Many builders have used the lower hole placement without issues and the upper hole is at a place where the leading edge of the rudder doesn't leave much space:
Photo by J. Tremble - See also discussions
- FB Post 6/1/2022
- FB Post 3/31/2022
- FB Post 3/29/2022
- FB Post 12/24/2019
- A tail light is not needed if the wing tips have white rear position lights as on the Aveo Ziptips. See CFR title 14 volume 1 section 23.1385 (c): Rear position light. The rear position light must be a white light mounted as far aft as practicable on the tail or on each wing tip.
