BRS Installation Hints: Difference between revisions
Jump to navigation
Jump to search
(Created page with "== Rear Top Angle Brackets == *The manual asks for a 7.5 inch distance between the center of the brackets. That is really not achievable. On the right side, the angle bracket needs to sit further to the right because of the center strut. If you then locate the left angle bracket 7.5 inches apart, the bracket overlaps the J-stiffener completely. A compromise is to overlap the stiffener just a tiny bit so you can still reach the rivet line. It requires filing a bit off the...") |
(No difference)
|
Revision as of 05:34, 30 April 2023
Rear Top Angle Brackets
- The manual asks for a 7.5 inch distance between the center of the brackets. That is really not achievable. On the right side, the angle bracket needs to sit further to the right because of the center strut. If you then locate the left angle bracket 7.5 inches apart, the bracket overlaps the J-stiffener completely. A compromise is to overlap the stiffener just a tiny bit so you can still reach the rivet line. It requires filing a bit off the angle bracket to make room for the j-stiffener in the short overlap area.
