SECTION 27: FIREWALL: Difference between revisions
Jump to navigation
Jump to search
m (→PAGE 27-2) |
|||
| Line 9: | Line 9: | ||
* Look ahead in the plans to see if you want to do the double plastic bushing. The RV-14 kit uses an FF-00001 to penetrate the firewall:<br>[[File:Ff-00001.png|659x659px]] | * Look ahead in the plans to see if you want to do the double plastic bushing. The RV-14 kit uses an FF-00001 to penetrate the firewall:<br>[[File:Ff-00001.png|659x659px]] | ||
* Many people have used the following pass-thru with the RV-10 (at Spruce: [https://www.aircraftspruce.com/catalog/hapages/ssfirewallkit12-04762.php?clickkey=5015617 Avery SS Firewall Pass-Thru]):<br>[[File:Avery SS Pass-Thru.png|304x304px]] | * Many people have used the following pass-thru with the RV-10 (at Spruce: [https://www.aircraftspruce.com/catalog/hapages/ssfirewallkit12-04762.php?clickkey=5015617 Avery SS Firewall Pass-Thru]):<br>[[File:Avery SS Pass-Thru.png|304x304px]] | ||
==== Step 7 ==== | |||
Note when riveting F-1001M Left Side Angle, you need to leave the 2 holes that intersect the Oil Cooler Box Attach Holes open so that they can be used to attach the oil cooler in Section FF1-2 | |||
Revision as of 06:19, 25 July 2022
Build Instruction Updates
- N/A
Check for more recent updates here
PAGE 27-2
- For additional info, see also section QB_Fuselage
- Plan your control cables pass-throughs at step 3
- Some people have used an "eyeball" type here that may require different spacing than the pre-punched holes provided in the kit.
Many use these for the control cable penetrations (at Spruce: EYEBALL FIREWALL FITTING- SS PRESSURE PLATE - STEEL TTP):
- Look ahead in the plans to see if you want to do the double plastic bushing. The RV-14 kit uses an FF-00001 to penetrate the firewall:
- Many people have used the following pass-thru with the RV-10 (at Spruce: Avery SS Firewall Pass-Thru):
Step 7
Note when riveting F-1001M Left Side Angle, you need to leave the 2 holes that intersect the Oil Cooler Box Attach Holes open so that they can be used to attach the oil cooler in Section FF1-2