Page history
23 November 2023
12 June 2022
27 March 2022
Added an image for the fix...
+436
Created page with "Cutting the lens is easy - use your tin snips and then sand to get the edges straight. I would suggest waiting until the wings are on the plane and the ailerons rigged before you drill these. I did them in the jig while vertical since I liked the access - put the flaps to the stop, lined up the ailerons and figured I'd be good. Outcome was that I was 1/4" low, and had to cut the back edge apart to be able to adjust the wing tip so it would align nicely with the aileron."
+476