SECTION OP-56: TAIL LIGHTING - Revision history

Martin at 10:46, 23 November 2023

2023-11-23T10:46:48Z

← Older revision		Revision as of 10:46, 23 November 2023
Line 11:		Line 11:
	** FB Post [https://www.facebook.com/groups/vansrv10/posts/2567889603332123 12/24/2019]		** FB Post [https://www.facebook.com/groups/vansrv10/posts/2567889603332123 12/24/2019]
	*A tail light is not needed if the wing tips have white rear position lights as on the Aveo Ziptips. See CFR title 14 volume 1 section 23.1385 (c): Rear position light. The rear position light must be a white light mounted as far aft as practicable on the tail '''or on each wing tip'''.		*A tail light is not needed if the wing tips have white rear position lights as on the Aveo Ziptips. See CFR title 14 volume 1 section 23.1385 (c): Rear position light. The rear position light must be a white light mounted as far aft as practicable on the tail '''or on each wing tip'''.

			[[Category:Hints]]

Martin: /* Build Instruction Updates */

2022-06-12T05:58:21Z

Build Instruction Updates

← Older revision		Revision as of 05:58, 12 June 2022
Line 1:		Line 1:
	=== Build Instruction Updates ===		=== Build Instruction Updates ===
	* 09/24/19 [https://www.vansaircraft.com/wp-content/uploads/2019/09/OP-56-Tail-Lighting.pdf OP-56-Tail-Lighting.pdf]		* 09/24/19 [https://www.vansaircraft.com/wp-content/uploads/2019/09/OP-56-Tail-Lighting.pdf OP-56-Tail-Lighting.pdf]
			Check for more recent updates [https://www.vansaircraft.com/service-information-and-revisions/?aircraft=rv-10&doctype=revisions-changes&sort=date here]

	=== Hints ===		=== Hints ===

Martin: /* Build Instruction Updates */

2022-06-12T05:40:14Z

Build Instruction Updates

← Older revision		Revision as of 05:40, 12 June 2022
Line 1:		Line 1:
	=== Build Instruction Updates ===		=== Build Instruction Updates ===
	* 05/08/15 [https://www.vansaircraft.com/wp-content/uploads/2019/09/OP-56-Tail-Lighting.pdf OP-56-Tail-Lighting.pdf]		* 09/24/19 [https://www.vansaircraft.com/wp-content/uploads/2019/09/OP-56-Tail-Lighting.pdf OP-56-Tail-Lighting.pdf]

	=== Hints ===		=== Hints ===

Martin at 05:16, 12 June 2022

2022-06-12T05:16:13Z

← Older revision		Revision as of 05:16, 12 June 2022
Line 1:		Line 1:
	~~Notes~~:		=== Build Instruction Updates ===
			* 05/08/15 [https://www.vansaircraft.com/wp-content/uploads/2019/09/OP-56-Tail-Lighting.pdf OP-56-Tail-Lighting.pdf]

			=== Hints ===
	* The suggested hole to bring the tail light cable into the fuselage is above the bottom rudder hinge in OP-56. In the obsolete RV-10 electrical wiring instructions (OP-37), the hole was shown below the hinge. Many builders have used the lower hole placement without issues and the upper hole is at a place where the leading edge of the rudder doesn't leave much space:<br>[[File:Tail light cable1.jpg\|200px]]<br>''Photo by J. Tremble''		* The suggested hole to bring the tail light cable into the fuselage is above the bottom rudder hinge in OP-56. In the obsolete RV-10 electrical wiring instructions (OP-37), the hole was shown below the hinge. Many builders have used the lower hole placement without issues and the upper hole is at a place where the leading edge of the rudder doesn't leave much space:<br>[[File:Tail light cable1.jpg\|200px]]<br>''Photo by J. Tremble''
	* See also discussions		* See also discussions

Martin at 04:26, 2 June 2022

2022-06-02T04:26:34Z

← Older revision		Revision as of 04:26, 2 June 2022
Line 2:		Line 2:
	* The suggested hole to bring the tail light cable into the fuselage is above the bottom rudder hinge in OP-56. In the obsolete RV-10 electrical wiring instructions (OP-37), the hole was shown below the hinge. Many builders have used the lower hole placement without issues and the upper hole is at a place where the leading edge of the rudder doesn't leave much space:<br>[[File:Tail light cable1.jpg\|200px]]<br>''Photo by J. Tremble''		* The suggested hole to bring the tail light cable into the fuselage is above the bottom rudder hinge in OP-56. In the obsolete RV-10 electrical wiring instructions (OP-37), the hole was shown below the hinge. Many builders have used the lower hole placement without issues and the upper hole is at a place where the leading edge of the rudder doesn't leave much space:<br>[[File:Tail light cable1.jpg\|200px]]<br>''Photo by J. Tremble''
	* See also discussions		* See also discussions
	** FB Post [https://www.facebook.com/groups/794208517366916 6/1/~~2922~~]		** FB Post [https://www.facebook.com/groups/794208517366916 6/1/2022]
	** FB Post [https://www.facebook.com/groups/vansrv10/posts/4886917024762691 3/31/2022]		** FB Post [https://www.facebook.com/groups/vansrv10/posts/4886917024762691 3/31/2022]
	** FB Post [https://www.facebook.com/groups/vansrv10/posts/4883530028434724 3/29/2022]		** FB Post [https://www.facebook.com/groups/vansrv10/posts/4883530028434724 3/29/2022]
	** FB Post [https://www.facebook.com/groups/vansrv10/posts/2567889603332123 12/24/2019]		** FB Post [https://www.facebook.com/groups/vansrv10/posts/2567889603332123 12/24/2019]
	*A tail light is not needed if the wing tips have white rear position lights as on the Aveo Ziptips. See CFR title 14 volume 1 section 23.1385 (c): Rear position light. The rear position light must be a white light mounted as far aft as practicable on the tail '''or on each wing tip'''.		*A tail light is not needed if the wing tips have white rear position lights as on the Aveo Ziptips. See CFR title 14 volume 1 section 23.1385 (c): Rear position light. The rear position light must be a white light mounted as far aft as practicable on the tail '''or on each wing tip'''.

Martin at 04:03, 2 June 2022

2022-06-02T04:03:37Z

← Older revision		Revision as of 04:03, 2 June 2022
Line 2:		Line 2:
	* The suggested hole to bring the tail light cable into the fuselage is above the bottom rudder hinge in OP-56. In the obsolete RV-10 electrical wiring instructions (OP-37), the hole was shown below the hinge. Many builders have used the lower hole placement without issues and the upper hole is at a place where the leading edge of the rudder doesn't leave much space:<br>[[File:Tail light cable1.jpg\|200px]]<br>''Photo by J. Tremble''		* The suggested hole to bring the tail light cable into the fuselage is above the bottom rudder hinge in OP-56. In the obsolete RV-10 electrical wiring instructions (OP-37), the hole was shown below the hinge. Many builders have used the lower hole placement without issues and the upper hole is at a place where the leading edge of the rudder doesn't leave much space:<br>[[File:Tail light cable1.jpg\|200px]]<br>''Photo by J. Tremble''
	* See also discussions		* See also discussions
			** FB Post [https://www.facebook.com/groups/794208517366916 6/1/2922]
	** FB Post [https://www.facebook.com/groups/vansrv10/posts/4886917024762691 3/31/2022]		** FB Post [https://www.facebook.com/groups/vansrv10/posts/4886917024762691 3/31/2022]
	** FB Post [https://www.facebook.com/groups/vansrv10/posts/4883530028434724 3/29/2022]		** FB Post [https://www.facebook.com/groups/vansrv10/posts/4883530028434724 3/29/2022]
	** FB Post [https://www.facebook.com/groups/vansrv10/posts/2567889603332123 12/24/2019]		** FB Post [https://www.facebook.com/groups/vansrv10/posts/2567889603332123 12/24/2019]
	*A tail light is not needed if the wing tips have white rear position lights as on the Aveo Ziptips. See CFR title 14 volume 1 section 23.1385 (c): Rear position light. The rear position light must be a white light mounted as far aft as practicable on the tail '''or on each wing tip'''.		*A tail light is not needed if the wing tips have white rear position lights as on the Aveo Ziptips. See CFR title 14 volume 1 section 23.1385 (c): Rear position light. The rear position light must be a white light mounted as far aft as practicable on the tail '''or on each wing tip'''.

Martin at 16:07, 23 May 2022

2022-05-23T16:07:55Z

← Older revision		Revision as of 16:07, 23 May 2022
Line 5:		Line 5:
	** FB Post [https://www.facebook.com/groups/vansrv10/posts/4883530028434724 3/29/2022]		** FB Post [https://www.facebook.com/groups/vansrv10/posts/4883530028434724 3/29/2022]
	** FB Post [https://www.facebook.com/groups/vansrv10/posts/2567889603332123 12/24/2019]		** FB Post [https://www.facebook.com/groups/vansrv10/posts/2567889603332123 12/24/2019]
	*A tail light is not needed if the wing tips have white rear position lights as on the Aveo Ziptips. See CFR ~~title14~~ volume 1 section 23.1385 (c): Rear position light. The rear position light must be a white light mounted as far aft as practicable on the tail '''or on each wing tip'''.		*A tail light is not needed if the wing tips have white rear position lights as on the Aveo Ziptips. See CFR title 14 volume 1 section 23.1385 (c): Rear position light. The rear position light must be a white light mounted as far aft as practicable on the tail '''or on each wing tip'''.

Martin at 16:07, 23 May 2022

2022-05-23T16:07:30Z

← Older revision		Revision as of 16:07, 23 May 2022
Line 5:		Line 5:
	** FB Post [https://www.facebook.com/groups/vansrv10/posts/4883530028434724 3/29/2022]		** FB Post [https://www.facebook.com/groups/vansrv10/posts/4883530028434724 3/29/2022]
	** FB Post [https://www.facebook.com/groups/vansrv10/posts/2567889603332123 12/24/2019]		** FB Post [https://www.facebook.com/groups/vansrv10/posts/2567889603332123 12/24/2019]
			*A tail light is not needed if the wing tips have white rear position lights as on the Aveo Ziptips. See CFR title14 volume 1 section 23.1385 (c): Rear position light. The rear position light must be a white light mounted as far aft as practicable on the tail '''or on each wing tip'''.

76.176.107.19 at 15:45, 31 March 2022

2022-03-31T15:45:21Z

← Older revision		Revision as of 15:45, 31 March 2022
Line 1:		Line 1:
	Notes:		Notes:
	* The suggested hole to bring the tail light cable into the fuselage is above the bottom rudder hinge in OP-56. In the obsolete RV-10 electrical wiring instructions (OP-37), the hole was shown below the hinge. Many builders have used the lower hole placement without issues and the upper hole is at a place where the leading edge of the rudder doesn't leave much space:<br>[[File:Tail light cable1.jpg\|200px]]<br>Photo by J. Tremble		* The suggested hole to bring the tail light cable into the fuselage is above the bottom rudder hinge in OP-56. In the obsolete RV-10 electrical wiring instructions (OP-37), the hole was shown below the hinge. Many builders have used the lower hole placement without issues and the upper hole is at a place where the leading edge of the rudder doesn't leave much space:<br>[[File:Tail light cable1.jpg\|200px]]<br>''Photo by J. Tremble''
	* See also discussions		* See also discussions
	** FB Post [https://www.facebook.com/groups/vansrv10/posts/4886917024762691 3/31/2022]		** FB Post [https://www.facebook.com/groups/vansrv10/posts/4886917024762691 3/31/2022]
	** FB Post [https://www.facebook.com/groups/vansrv10/posts/4883530028434724 3/29/2022]		** FB Post [https://www.facebook.com/groups/vansrv10/posts/4883530028434724 3/29/2022]
	** FB Post [https://www.facebook.com/groups/vansrv10/posts/2567889603332123 12/24/2019]		** FB Post [https://www.facebook.com/groups/vansrv10/posts/2567889603332123 12/24/2019]

76.176.107.19 at 15:45, 31 March 2022

2022-03-31T15:45:07Z

← Older revision		Revision as of 15:45, 31 March 2022
Line 1:		Line 1:
	Notes:		Notes:
	* The suggested hole to bring the tail light cable into the fuselage is above the bottom rudder hinge in OP-56. In the obsolete RV-10 electrical wiring instructions (OP-37), the hole was shown below the hinge. Many builders have used the lower hole placement without issues and the upper hole is at a place where the leading edge of the rudder doesn't leave much space:<br>[[File:Tail light cable1.jpg\|200px]]		* The suggested hole to bring the tail light cable into the fuselage is above the bottom rudder hinge in OP-56. In the obsolete RV-10 electrical wiring instructions (OP-37), the hole was shown below the hinge. Many builders have used the lower hole placement without issues and the upper hole is at a place where the leading edge of the rudder doesn't leave much space:<br>[[File:Tail light cable1.jpg\|200px]]<br>Photo by J. Tremble
	* See also discussions		* See also discussions
	** FB Post [https://www.facebook.com/groups/vansrv10/posts/4886917024762691 3/31/2022]		** FB Post [https://www.facebook.com/groups/vansrv10/posts/4886917024762691 3/31/2022]
	** FB Post [https://www.facebook.com/groups/vansrv10/posts/4883530028434724 3/29/2022]		** FB Post [https://www.facebook.com/groups/vansrv10/posts/4883530028434724 3/29/2022]
	** FB Post [https://www.facebook.com/groups/vansrv10/posts/2567889603332123 12/24/2019]		** FB Post [https://www.facebook.com/groups/vansrv10/posts/2567889603332123 12/24/2019]