SECTION 30: STEP INSTALLATION - Revision history

Amitkulkarni: fixed formatting

2025-10-28T07:21:44Z

fixed formatting

← Older revision		Revision as of 07:21, 28 October 2025
Line 11:		Line 11:
	These are extremely light, probably less than 0.1 ounce each.		These are extremely light, probably less than 0.1 ounce each.
	[[File:3D Printed PLA-Carbon Fiber.png\|left\|thumb\|335x335px\|3D Printed PLA-Carbon Fiber]]		[[File:3D Printed PLA-Carbon Fiber.png\|left\|thumb\|335x335px\|3D Printed PLA-Carbon Fiber]]

Amitkulkarni: Added directions for 3D printing Step stiffener and provided URL for actual file.

2025-10-28T07:21:00Z

Added directions for 3D printing Step stiffener and provided URL for actual file.

@@ Line 5: / Line 5: @@
 === Hints ===
 * Consider installing a pair of "step bushings" (https://www.tcwtech.com/product/rv-10-products/) in your RV-10 steps. Without them, it is likely that over time the bolt holding your step in place will enlarge the hole, and you'll have some movement/play in your step.<br>The instructions say to use a nylon string but something more sturdy is necessary should you need to pull the bushing back.<br>The bushings may require to be buffed to reduce their diameter to fit into the steps.<br>Make sure the step's bolt holes and the open end of the step are properly deburred before inserting the bushing.<br>[[File:2022-06-26 13-22-33.jpg|400px]]
 === Notes ===

Martin: /* Page 30-3 Step 3 */

2025-09-26T14:49:58Z

Page 30-3 Step 3

← Older revision		Revision as of 14:49, 26 September 2025
Line 13:		Line 13:

	==== Page 30-3 Step 3 ====		==== Page 30-3 Step 3 ====
	* Consider installing [https://www.airward.com/collections/airward-vans-rv10-kits/products/airward-vans-rv-10-baggage-compartment-access-cover-kit Airward access covers] or [https://store.vansaircraft.com/stall-cover-plate-kit-stall-cover-plate-kit.html Vans 6 x 5 access covers] to be able to reach the step bolts later. This requires drilling the step bolt holes at a 45 degrees angle, so the bolts can come out without touching the baggage floor, see [http://www.goodplaneliving.com/~~step~~-~~access~~-~~panels~~/ Good Plane Living Blog]. See this [https://www.facebook.com/groups/794208517366916/ FB thread] on the difficulties drilling at an angle].		* Consider installing [https://www.airward.com/collections/airward-vans-rv10-kits/products/airward-vans-rv-10-baggage-compartment-access-cover-kit Airward access covers] or [https://store.vansaircraft.com/stall-cover-plate-kit-stall-cover-plate-kit.html Vans 6 x 5 access covers] to be able to reach the step bolts later. This requires drilling the step bolt holes at a 45 degrees angle, so the bolts can come out without touching the baggage floor, see [https://web.archive.org/web/20201011075150/http://www.goodplaneliving.com/starting-the-steps-and-theyre-done/ Good Plane Living Blog at the web archive]. See this [https://www.facebook.com/groups/794208517366916/ FB thread] on the difficulties drilling at an angle.

	[[Category:Hints]]		[[Category:Hints]]

Martin: /* Page 30-3 Step 3 */

2025-09-26T14:42:28Z

Page 30-3 Step 3

← Older revision		Revision as of 14:42, 26 September 2025
Line 13:		Line 13:

	==== Page 30-3 Step 3 ====		==== Page 30-3 Step 3 ====
	* Consider installing [https://www.airward.com/collections/airward-vans-rv10-kits/products/airward-vans-rv-10-baggage-compartment-access-cover-kit Airward access covers] or [https://store.vansaircraft.com/stall-cover-plate-kit-stall-cover-plate-kit.html Vans 6 x 5 access covers] to be able to reach the step bolts later. This requires drilling the step bolt holes at a 45 degrees angle, so the bolts can come out without touching the baggage floor, see [http://www.goodplaneliving.com/step-access-panels/ Good Plane Living Blog].		* Consider installing [https://www.airward.com/collections/airward-vans-rv10-kits/products/airward-vans-rv-10-baggage-compartment-access-cover-kit Airward access covers] or [https://store.vansaircraft.com/stall-cover-plate-kit-stall-cover-plate-kit.html Vans 6 x 5 access covers] to be able to reach the step bolts later. This requires drilling the step bolt holes at a 45 degrees angle, so the bolts can come out without touching the baggage floor, see [http://www.goodplaneliving.com/step-access-panels/ Good Plane Living Blog]. See this [https://www.facebook.com/groups/794208517366916/ FB thread] on the difficulties drilling at an angle].

	[[Category:Hints]]		[[Category:Hints]]

Kirkbauer at 14:44, 23 February 2025

2025-02-23T14:44:24Z

← Older revision		Revision as of 14:44, 23 February 2025
Line 5:		Line 5:
	=== Hints ===		=== Hints ===
	* Consider installing a pair of "step bushings" (https://www.tcwtech.com/product/rv-10-products/) in your RV-10 steps. Without them, it is likely that over time the bolt holding your step in place will enlarge the hole, and you'll have some movement/play in your step.<br>The instructions say to use a nylon string but something more sturdy is necessary should you need to pull the bushing back.<br>The bushings may require to be buffed to reduce their diameter to fit into the steps.<br>Make sure the step's bolt holes and the open end of the step are properly deburred before inserting the bushing.<br>[[File:2022-06-26 13-22-33.jpg\|400px]]		* Consider installing a pair of "step bushings" (https://www.tcwtech.com/product/rv-10-products/) in your RV-10 steps. Without them, it is likely that over time the bolt holding your step in place will enlarge the hole, and you'll have some movement/play in your step.<br>The instructions say to use a nylon string but something more sturdy is necessary should you need to pull the bushing back.<br>The bushings may require to be buffed to reduce their diameter to fit into the steps.<br>Make sure the step's bolt holes and the open end of the step are properly deburred before inserting the bushing.<br>[[File:2022-06-26 13-22-33.jpg\|400px]]
	===== Page 30-2 Step 4 =====
			=== Notes ===
			==== Page 30-2 Step 4 ====
	* On some plans, the transparent baggage floor F-1022A-L is not showing as outline (it's of gray color). Please check the pdf of the electronic version.<br>[[File:Screen Shot 2023-12-26 at 10.44.48 AM.png\|428x428px]]		* On some plans, the transparent baggage floor F-1022A-L is not showing as outline (it's of gray color). Please check the pdf of the electronic version.<br>[[File:Screen Shot 2023-12-26 at 10.44.48 AM.png\|428x428px]]

	* See this [https://www.facebook.com/groups/vansrv10/posts/6869599783161062 FB thread] on how to have the floor in and mark at the same time.		* See this [https://www.facebook.com/groups/vansrv10/posts/6869599783161062 FB thread] on how to have the floor in and mark at the same time.

	===== Page 30-3 Step 3 =====		==== Page 30-3 Step 3 ====
	* Consider installing [https://www.airward.com/collections/airward-vans-rv10-kits/products/airward-vans-rv-10-baggage-compartment-access-cover-kit Airward access covers] or [https://store.vansaircraft.com/stall-cover-plate-kit-stall-cover-plate-kit.html Vans 6 x 5 access covers] to be able to reach the step bolts later. This requires drilling the step bolt holes at a 45 degrees angle, so the bolts can come out without touching the baggage floor, see [http://www.goodplaneliving.com/step-access-panels/ Good Plane Living Blog].		* Consider installing [https://www.airward.com/collections/airward-vans-rv10-kits/products/airward-vans-rv-10-baggage-compartment-access-cover-kit Airward access covers] or [https://store.vansaircraft.com/stall-cover-plate-kit-stall-cover-plate-kit.html Vans 6 x 5 access covers] to be able to reach the step bolts later. This requires drilling the step bolt holes at a 45 degrees angle, so the bolts can come out without touching the baggage floor, see [http://www.goodplaneliving.com/step-access-panels/ Good Plane Living Blog].

	[[Category:Hints]]		[[Category:Hints]]

Martin: /* Page 30-3 Step 3 */

2023-12-26T18:47:16Z

Page 30-3 Step 3

← Older revision		Revision as of 18:47, 26 December 2023
Line 13:		Line 13:
	* Consider installing [https://www.airward.com/collections/airward-vans-rv10-kits/products/airward-vans-rv-10-baggage-compartment-access-cover-kit Airward access covers] or [https://store.vansaircraft.com/stall-cover-plate-kit-stall-cover-plate-kit.html Vans 6 x 5 access covers] to be able to reach the step bolts later. This requires drilling the step bolt holes at a 45 degrees angle, so the bolts can come out without touching the baggage floor, see [http://www.goodplaneliving.com/step-access-panels/ Good Plane Living Blog].		* Consider installing [https://www.airward.com/collections/airward-vans-rv10-kits/products/airward-vans-rv-10-baggage-compartment-access-cover-kit Airward access covers] or [https://store.vansaircraft.com/stall-cover-plate-kit-stall-cover-plate-kit.html Vans 6 x 5 access covers] to be able to reach the step bolts later. This requires drilling the step bolt holes at a 45 degrees angle, so the bolts can come out without touching the baggage floor, see [http://www.goodplaneliving.com/step-access-panels/ Good Plane Living Blog].

	[[~~index.php?title=~~Category:Hints]]		[[Category:Hints]]

Martin: /* Page 30-2 Step 4 */

2023-12-26T18:46:36Z

Page 30-2 Step 4

← Older revision		Revision as of 18:46, 26 December 2023
Line 6:		Line 6:
	* Consider installing a pair of "step bushings" (https://www.tcwtech.com/product/rv-10-products/) in your RV-10 steps. Without them, it is likely that over time the bolt holding your step in place will enlarge the hole, and you'll have some movement/play in your step.<br>The instructions say to use a nylon string but something more sturdy is necessary should you need to pull the bushing back.<br>The bushings may require to be buffed to reduce their diameter to fit into the steps.<br>Make sure the step's bolt holes and the open end of the step are properly deburred before inserting the bushing.<br>[[File:2022-06-26 13-22-33.jpg\|400px]]		* Consider installing a pair of "step bushings" (https://www.tcwtech.com/product/rv-10-products/) in your RV-10 steps. Without them, it is likely that over time the bolt holding your step in place will enlarge the hole, and you'll have some movement/play in your step.<br>The instructions say to use a nylon string but something more sturdy is necessary should you need to pull the bushing back.<br>The bushings may require to be buffed to reduce their diameter to fit into the steps.<br>Make sure the step's bolt holes and the open end of the step are properly deburred before inserting the bushing.<br>[[File:2022-06-26 13-22-33.jpg\|400px]]
	===== Page 30-2 Step 4 =====		===== Page 30-2 Step 4 =====
	* On some plans, the transparent baggage floor F-1022A-L is not showing as outline (it's of gray color). Please check the pdf on the electronic version.<br>[[File:Screen Shot 2023-12-26 at 10.44.48 AM.png\|428x428px]]		* On some plans, the transparent baggage floor F-1022A-L is not showing as outline (it's of gray color). Please check the pdf of the electronic version.<br>[[File:Screen Shot 2023-12-26 at 10.44.48 AM.png\|428x428px]]

	* See this [https://www.facebook.com/groups/vansrv10/posts/6869599783161062 FB thread] on how to have the floor in and mark at the same time.		* See this [https://www.facebook.com/groups/vansrv10/posts/6869599783161062 FB thread] on how to have the floor in and mark at the same time.

Martin: /* Page 30-2 Step 4 */

2023-12-26T18:45:56Z

Page 30-2 Step 4

← Older revision		Revision as of 18:45, 26 December 2023
Line 6:		Line 6:
	* Consider installing a pair of "step bushings" (https://www.tcwtech.com/product/rv-10-products/) in your RV-10 steps. Without them, it is likely that over time the bolt holding your step in place will enlarge the hole, and you'll have some movement/play in your step.<br>The instructions say to use a nylon string but something more sturdy is necessary should you need to pull the bushing back.<br>The bushings may require to be buffed to reduce their diameter to fit into the steps.<br>Make sure the step's bolt holes and the open end of the step are properly deburred before inserting the bushing.<br>[[File:2022-06-26 13-22-33.jpg\|400px]]		* Consider installing a pair of "step bushings" (https://www.tcwtech.com/product/rv-10-products/) in your RV-10 steps. Without them, it is likely that over time the bolt holding your step in place will enlarge the hole, and you'll have some movement/play in your step.<br>The instructions say to use a nylon string but something more sturdy is necessary should you need to pull the bushing back.<br>The bushings may require to be buffed to reduce their diameter to fit into the steps.<br>Make sure the step's bolt holes and the open end of the step are properly deburred before inserting the bushing.<br>[[File:2022-06-26 13-22-33.jpg\|400px]]
	===== Page 30-2 Step 4 =====		===== Page 30-2 Step 4 =====
	* On some plans, the transparent baggage floor F-1022A-L is not showing as outline (it's of gray color). Please check the pdf on the electronic version.		* On some plans, the transparent baggage floor F-1022A-L is not showing as outline (it's of gray color). Please check the pdf on the electronic version.<br>[[File:Screen Shot 2023-12-26 at 10.44.48 AM.png\|428x428px]]
	* [[File:Screen Shot 2023-12-26 at 10.44.48 AM.png\|428x428px]]

	* See this [https://www.facebook.com/groups/vansrv10/posts/6869599783161062 FB thread] on how to have the floor in and mark at the same time.		* See this [https://www.facebook.com/groups/vansrv10/posts/6869599783161062 FB thread] on how to have the floor in and mark at the same time.


	===== Page 30-3 Step 3 =====		===== Page 30-3 Step 3 =====

Martin: /* Page 30-2 Step 4 */

2023-12-26T18:45:39Z

Page 30-2 Step 4

← Older revision		Revision as of 18:45, 26 December 2023
Line 6:		Line 6:
	* Consider installing a pair of "step bushings" (https://www.tcwtech.com/product/rv-10-products/) in your RV-10 steps. Without them, it is likely that over time the bolt holding your step in place will enlarge the hole, and you'll have some movement/play in your step.<br>The instructions say to use a nylon string but something more sturdy is necessary should you need to pull the bushing back.<br>The bushings may require to be buffed to reduce their diameter to fit into the steps.<br>Make sure the step's bolt holes and the open end of the step are properly deburred before inserting the bushing.<br>[[File:2022-06-26 13-22-33.jpg\|400px]]		* Consider installing a pair of "step bushings" (https://www.tcwtech.com/product/rv-10-products/) in your RV-10 steps. Without them, it is likely that over time the bolt holding your step in place will enlarge the hole, and you'll have some movement/play in your step.<br>The instructions say to use a nylon string but something more sturdy is necessary should you need to pull the bushing back.<br>The bushings may require to be buffed to reduce their diameter to fit into the steps.<br>Make sure the step's bolt holes and the open end of the step are properly deburred before inserting the bushing.<br>[[File:2022-06-26 13-22-33.jpg\|400px]]
	===== Page 30-2 Step 4 =====		===== Page 30-2 Step 4 =====
			* On some plans, the transparent baggage floor F-1022A-L is not showing as outline (it's of gray color). Please check the pdf on the electronic version.
			* [[File:Screen Shot 2023-12-26 at 10.44.48 AM.png\|428x428px]]

	* See this [https://www.facebook.com/groups/vansrv10/posts/6869599783161062 FB thread] on how to have the floor in and mark at the same time.		* See this [https://www.facebook.com/groups/vansrv10/posts/6869599783161062 FB thread] on how to have the floor in and mark at the same time.


	===== Page 30-3 Step 3 =====		===== Page 30-3 Step 3 =====
	* Consider installing [https://www.airward.com/collections/airward-vans-rv10-kits/products/airward-vans-rv-10-baggage-compartment-access-cover-kit Airward access covers] or [https://store.vansaircraft.com/stall-cover-plate-kit-stall-cover-plate-kit.html Vans 6 x 5 access covers] to be able to reach the step bolts later. This requires drilling the step bolt holes at a 45 degrees angle, so the bolts can come out without touching the baggage floor, see [http://www.goodplaneliving.com/step-access-panels/ Good Plane Living Blog].		* Consider installing [https://www.airward.com/collections/airward-vans-rv10-kits/products/airward-vans-rv-10-baggage-compartment-access-cover-kit Airward access covers] or [https://store.vansaircraft.com/stall-cover-plate-kit-stall-cover-plate-kit.html Vans 6 x 5 access covers] to be able to reach the step bolts later. This requires drilling the step bolt holes at a 45 degrees angle, so the bolts can come out without touching the baggage floor, see [http://www.goodplaneliving.com/step-access-panels/ Good Plane Living Blog].

	[[Category:Hints]]		[[index.php?title=Category:Hints]]

Martin: /* Page 30-3 Step 3 */

2023-12-25T07:29:11Z

Page 30-3 Step 3

← Older revision		Revision as of 07:29, 25 December 2023
Line 5:		Line 5:
	=== Hints ===		=== Hints ===
	* Consider installing a pair of "step bushings" (https://www.tcwtech.com/product/rv-10-products/) in your RV-10 steps. Without them, it is likely that over time the bolt holding your step in place will enlarge the hole, and you'll have some movement/play in your step.<br>The instructions say to use a nylon string but something more sturdy is necessary should you need to pull the bushing back.<br>The bushings may require to be buffed to reduce their diameter to fit into the steps.<br>Make sure the step's bolt holes and the open end of the step are properly deburred before inserting the bushing.<br>[[File:2022-06-26 13-22-33.jpg\|400px]]		* Consider installing a pair of "step bushings" (https://www.tcwtech.com/product/rv-10-products/) in your RV-10 steps. Without them, it is likely that over time the bolt holding your step in place will enlarge the hole, and you'll have some movement/play in your step.<br>The instructions say to use a nylon string but something more sturdy is necessary should you need to pull the bushing back.<br>The bushings may require to be buffed to reduce their diameter to fit into the steps.<br>Make sure the step's bolt holes and the open end of the step are properly deburred before inserting the bushing.<br>[[File:2022-06-26 13-22-33.jpg\|400px]]
			===== Page 30-2 Step 4 =====
			* See this [https://www.facebook.com/groups/vansrv10/posts/6869599783161062 FB thread] on how to have the floor in and mark at the same time.
	===== Page 30-3 Step 3 =====		===== Page 30-3 Step 3 =====
	* Consider installing [https://www.airward.com/collections/airward-vans-rv10-kits/products/airward-vans-rv-10-baggage-compartment-access-cover-kit Airward access covers] or [https://store.vansaircraft.com/stall-cover-plate-kit-stall-cover-plate-kit.html Vans 6 x 5 access covers] to be able to reach the step bolts later. This requires drilling the step bolt holes at a 45 degrees angle, so the bolts can come out without touching the baggage floor, see [http://www.goodplaneliving.com/step-access-panels/ Good Plane Living Blog].		* Consider installing [https://www.airward.com/collections/airward-vans-rv10-kits/products/airward-vans-rv-10-baggage-compartment-access-cover-kit Airward access covers] or [https://store.vansaircraft.com/stall-cover-plate-kit-stall-cover-plate-kit.html Vans 6 x 5 access covers] to be able to reach the step bolts later. This requires drilling the step bolt holes at a 45 degrees angle, so the bolts can come out without touching the baggage floor, see [http://www.goodplaneliving.com/step-access-panels/ Good Plane Living Blog].

	[[Category:Hints]]		[[Category:Hints]]