https://rv10.org/index.php?action=history&feed=atom&title=Current_Sensors
Current Sensors - Revision history
2026-04-29T00:09:51Z
Revision history for this page on the wiki
MediaWiki 1.40.1
https://rv10.org/index.php?title=Current_Sensors&diff=3882&oldid=prev
Martin at 20:54, 29 January 2025
2025-01-29T20:54:27Z
<p></p>
<table style="background-color: #fff; color: #202122;" data-mw="interface">
<col class="diff-marker" />
<col class="diff-content" />
<col class="diff-marker" />
<col class="diff-content" />
<tr class="diff-title" lang="en">
<td colspan="2" style="background-color: #fff; color: #202122; text-align: center;">← Older revision</td>
<td colspan="2" style="background-color: #fff; color: #202122; text-align: center;">Revision as of 20:54, 29 January 2025</td>
</tr><tr><td colspan="2" class="diff-lineno" id="mw-diff-left-l1">Line 1:</td>
<td colspan="2" class="diff-lineno">Line 1:</td></tr>
<tr><td class="diff-marker"></td><td style="background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"><div>Instead of using resistor shunts to measure battery or alternator currents, one can also use Hall effect sensors that do not necessitate to cut the cable and run the current through a shunt (more failure points).</div></td><td class="diff-marker"></td><td style="background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"><div>Instead of using resistor shunts to measure battery or alternator currents, one can also use Hall effect sensors that do not necessitate to cut the cable and run the current through a shunt (more failure points).</div></td></tr>
<tr><td class="diff-marker"></td><td style="background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"><div>Garmin recommends the Amploc Key100 sensor. Reportedly, Dynon also recommends it. GRT sells the Key100 sensor as CS-01 ($89, includes cable though)<br></div></td><td class="diff-marker"></td><td style="background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"><div>Garmin recommends the Amploc Key100 sensor. Reportedly, Dynon also recommends it. GRT sells the Key100 sensor as CS-01 ($89, includes cable though)<br></div></td></tr>
<tr><td class="diff-marker" data-marker="−"></td><td style="color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #ffe49c; vertical-align: top; white-space: pre-wrap;"><div>Shunts need 1A inline fuses for each of the two current sensor connectors, Hall effect sensors do not.<br>[https://amploc.com/products/key100-open-loop-hall-effect-sensor AMPLOC KEY100 Current Sensor]<br>[[File:2023-03-27 16-03-50.jpg|367x367px]]<br>The Key100 sensor doesn't really have a proper Molex connector, rather it has 3 gold pins that are cut off a wire-wrap pin-header strip plus a plastic glued on that makes it asymmetric for Molex connectors. You need to cut off one of the protruding keys on the Molex connector to make it fit. You also want to scrape off the ledge at the bottom if it is binding there.<br></div></td><td class="diff-marker" data-marker="+"></td><td style="color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #a3d3ff; vertical-align: top; white-space: pre-wrap;"><div>Shunts need <ins style="font-weight: bold; text-decoration: none;">[https://www.digikey.com/en/products/detail/littelfuse-inc/0251001-NRT1L/700721 </ins>1A inline fuses<ins style="font-weight: bold; text-decoration: none;">] </ins>for each of the two current sensor connectors, Hall effect sensors do not.<br>[https://amploc.com/products/key100-open-loop-hall-effect-sensor AMPLOC KEY100 Current Sensor]<br>[[File:2023-03-27 16-03-50.jpg|367x367px]]<br>The Key100 sensor doesn't really have a proper Molex connector, rather it has 3 gold pins that are cut off a wire-wrap pin-header strip plus a plastic glued on that makes it asymmetric for Molex connectors. You need to cut off one of the protruding keys on the Molex connector to make it fit. You also want to scrape off the ledge at the bottom if it is binding there.<br></div></td></tr>
<tr><td class="diff-marker"></td><td style="background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"><div>[[File:2023-03-31 09-46-47.jpg|400x400px]]<br><br></div></td><td class="diff-marker"></td><td style="background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"><div>[[File:2023-03-31 09-46-47.jpg|400x400px]]<br><br></div></td></tr>
<tr><td class="diff-marker"></td><td style="background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"><div>Here is a somewhat compatible Molex connector (needs small mods, see above):</div></td><td class="diff-marker"></td><td style="background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"><div>Here is a somewhat compatible Molex connector (needs small mods, see above):</div></td></tr>
</table>
Martin
https://rv10.org/index.php?title=Current_Sensors&diff=3881&oldid=prev
Martin at 15:12, 29 January 2025
2025-01-29T15:12:21Z
<p></p>
<table style="background-color: #fff; color: #202122;" data-mw="interface">
<col class="diff-marker" />
<col class="diff-content" />
<col class="diff-marker" />
<col class="diff-content" />
<tr class="diff-title" lang="en">
<td colspan="2" style="background-color: #fff; color: #202122; text-align: center;">← Older revision</td>
<td colspan="2" style="background-color: #fff; color: #202122; text-align: center;">Revision as of 15:12, 29 January 2025</td>
</tr><tr><td colspan="2" class="diff-lineno" id="mw-diff-left-l5">Line 5:</td>
<td colspan="2" class="diff-lineno">Line 5:</td></tr>
<tr><td class="diff-marker"></td><td style="background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"><div>Here is a somewhat compatible Molex connector (needs small mods, see above):</div></td><td class="diff-marker"></td><td style="background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"><div>Here is a somewhat compatible Molex connector (needs small mods, see above):</div></td></tr>
<tr><td class="diff-marker"></td><td style="background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"><div>* [https://www.digikey.com/en/products/detail/molex/0022011032/403289?s=N4IgTCBcDa5gtABgIz2YgzBAugXyA Molex 0022011032 connector housing @Digikey (in stock)]</div></td><td class="diff-marker"></td><td style="background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"><div>* [https://www.digikey.com/en/products/detail/molex/0022011032/403289?s=N4IgTCBcDa5gtABgIz2YgzBAugXyA Molex 0022011032 connector housing @Digikey (in stock)]</div></td></tr>
<tr><td class="diff-marker" data-marker="−"></td><td style="color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #ffe49c; vertical-align: top; white-space: pre-wrap;"><div>* [https://us.rs-online.com/product/molex-incorporated/22-01-1032/70332831/ Molex 0022011032 connector housing @RS (<del style="font-weight: bold; text-decoration: none;">no shipment date</del>)]</div></td><td class="diff-marker" data-marker="+"></td><td style="color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #a3d3ff; vertical-align: top; white-space: pre-wrap;"><div>* [https://us.rs-online.com/product/molex-incorporated/22-01-1032/70332831/ Molex 0022011032 connector housing @RS (<ins style="font-weight: bold; text-decoration: none;">in stock</ins>)]</div></td></tr>
<tr><td class="diff-marker"></td><td style="background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"><div>22 AWG Pins</div></td><td class="diff-marker"></td><td style="background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"><div>22 AWG Pins</div></td></tr>
<tr><td class="diff-marker"></td><td style="background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"><div>* [https://www.digikey.com/en/products/detail/molex/0008550102/172056?s=N4IgTCBcDaIAwA4C0BWFS4EY4QLoF8g 22 AWG gold plated 08550102 pins for Molex connector @Digikey (in stock)]</div></td><td class="diff-marker"></td><td style="background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"><div>* [https://www.digikey.com/en/products/detail/molex/0008550102/172056?s=N4IgTCBcDaIAwA4C0BWFS4EY4QLoF8g 22 AWG gold plated 08550102 pins for Molex connector @Digikey (in stock)]</div></td></tr>
<tr><td class="diff-marker" data-marker="−"></td><td style="color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #ffe49c; vertical-align: top; white-space: pre-wrap;"><div>* [https://us.rs-online.com/product/molex-incorporated/08-55-0102/70191082/ 22 AWG gold plated 08550102 pins for Molex connector @RS (<del style="font-weight: bold; text-decoration: none;">backordered</del>)]</div></td><td class="diff-marker" data-marker="+"></td><td style="color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #a3d3ff; vertical-align: top; white-space: pre-wrap;"><div>* [https://us.rs-online.com/product/molex-incorporated/08-55-0102/70191082/ 22 AWG gold plated 08550102 pins for Molex connector @RS (<ins style="font-weight: bold; text-decoration: none;">in stock</ins>)]</div></td></tr>
<tr><td class="diff-marker"></td><td style="background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"><div>Crimper</div></td><td class="diff-marker"></td><td style="background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"><div>Crimper</div></td></tr>
<tr><td class="diff-marker"></td><td style="background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"><div>* [https://www.digikey.com/en/products/detail/adafruit-industries-llc/1213/8258462 Adafruit SN-28B Crimper] (use smallest diameter opening, floor of pin gets pushed in, lugs bend and fold when pushed into upper part)</div></td><td class="diff-marker"></td><td style="background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"><div>* [https://www.digikey.com/en/products/detail/adafruit-industries-llc/1213/8258462 Adafruit SN-28B Crimper] (use smallest diameter opening, floor of pin gets pushed in, lugs bend and fold when pushed into upper part)</div></td></tr>
</table>
Martin
https://rv10.org/index.php?title=Current_Sensors&diff=3880&oldid=prev
Martin at 22:29, 28 January 2025
2025-01-28T22:29:23Z
<p></p>
<table style="background-color: #fff; color: #202122;" data-mw="interface">
<col class="diff-marker" />
<col class="diff-content" />
<col class="diff-marker" />
<col class="diff-content" />
<tr class="diff-title" lang="en">
<td colspan="2" style="background-color: #fff; color: #202122; text-align: center;">← Older revision</td>
<td colspan="2" style="background-color: #fff; color: #202122; text-align: center;">Revision as of 22:29, 28 January 2025</td>
</tr><tr><td colspan="2" class="diff-lineno" id="mw-diff-left-l14">Line 14:</td>
<td colspan="2" class="diff-lineno">Line 14:</td></tr>
<tr><td class="diff-marker"></td><td style="background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"><div>* 1 (inner): 5V</div></td><td class="diff-marker"></td><td style="background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"><div>* 1 (inner): 5V</div></td></tr>
<tr><td class="diff-marker"></td><td style="background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"><div>* 2 (middle): GND</div></td><td class="diff-marker"></td><td style="background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"><div>* 2 (middle): GND</div></td></tr>
<tr><td class="diff-marker" data-marker="−"></td><td style="color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #ffe49c; vertical-align: top; white-space: pre-wrap;"><div>* 3 (outer): Output, <del style="font-weight: bold; text-decoration: none;">data sheet says </del>15.9 mV / Amp and 0 Amps is at 2.<del style="font-weight: bold; text-decoration: none;">2V</del>, however <del style="font-weight: bold; text-decoration: none;">recent shipments may </del>have <del style="font-weight: bold; text-decoration: none;">0 Amps at 2</del>.<del style="font-weight: bold; text-decoration: none;">5V and 10 </del>mV / <del style="font-weight: bold; text-decoration: none;">Amp</del>. </div></td><td class="diff-marker" data-marker="+"></td><td style="color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #a3d3ff; vertical-align: top; white-space: pre-wrap;"><div>* 3 (outer): Output, 15.9 mV / Amp and 0 Amps is at 2.<ins style="font-weight: bold; text-decoration: none;">5V</ins>, however <ins style="font-weight: bold; text-decoration: none;">some were accidentally shipped out that look identical that </ins>have <ins style="font-weight: bold; text-decoration: none;">only 10</ins>.<ins style="font-weight: bold; text-decoration: none;">4 </ins>mV/<ins style="font-weight: bold; text-decoration: none;">A. Amploc will exchange those. Consider testing them after arrival</ins>.</div></td></tr>
<tr><td class="diff-marker"></td><td style="background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"><br/></td><td class="diff-marker"></td><td style="background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"><br/></td></tr>
<tr><td class="diff-marker"></td><td style="background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"><div>Mounting</div></td><td class="diff-marker"></td><td style="background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"><div>Mounting</div></td></tr>
</table>
Martin
https://rv10.org/index.php?title=Current_Sensors&diff=3876&oldid=prev
Martin at 03:34, 28 January 2025
2025-01-28T03:34:07Z
<p></p>
<table style="background-color: #fff; color: #202122;" data-mw="interface">
<col class="diff-marker" />
<col class="diff-content" />
<col class="diff-marker" />
<col class="diff-content" />
<tr class="diff-title" lang="en">
<td colspan="2" style="background-color: #fff; color: #202122; text-align: center;">← Older revision</td>
<td colspan="2" style="background-color: #fff; color: #202122; text-align: center;">Revision as of 03:34, 28 January 2025</td>
</tr><tr><td colspan="2" class="diff-lineno" id="mw-diff-left-l14">Line 14:</td>
<td colspan="2" class="diff-lineno">Line 14:</td></tr>
<tr><td class="diff-marker"></td><td style="background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"><div>* 1 (inner): 5V</div></td><td class="diff-marker"></td><td style="background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"><div>* 1 (inner): 5V</div></td></tr>
<tr><td class="diff-marker"></td><td style="background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"><div>* 2 (middle): GND</div></td><td class="diff-marker"></td><td style="background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"><div>* 2 (middle): GND</div></td></tr>
<tr><td class="diff-marker" data-marker="−"></td><td style="color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #ffe49c; vertical-align: top; white-space: pre-wrap;"><div>* 3 (outer): Output, 15.9 mV / Amp <del style="font-weight: bold; text-decoration: none;">(1</del>.<del style="font-weight: bold; text-decoration: none;">59V @ 100A)</del></div></td><td class="diff-marker" data-marker="+"></td><td style="color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #a3d3ff; vertical-align: top; white-space: pre-wrap;"><div>* 3 (outer): Output, <ins style="font-weight: bold; text-decoration: none;">data sheet says </ins>15.9 mV / Amp <ins style="font-weight: bold; text-decoration: none;">and 0 Amps is at 2.2V, however recent shipments may have 0 Amps at 2.5V and 10 mV / Amp</ins>. </div></td></tr>
<tr><td class="diff-marker"></td><td style="background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"><br/></td><td class="diff-marker"></td><td style="background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"><br/></td></tr>
<tr><td class="diff-marker"></td><td style="background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"><div>Mounting</div></td><td class="diff-marker"></td><td style="background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"><div>Mounting</div></td></tr>
</table>
Martin
https://rv10.org/index.php?title=Current_Sensors&diff=3875&oldid=prev
Martin at 23:03, 27 January 2025
2025-01-27T23:03:32Z
<p></p>
<table style="background-color: #fff; color: #202122;" data-mw="interface">
<col class="diff-marker" />
<col class="diff-content" />
<col class="diff-marker" />
<col class="diff-content" />
<tr class="diff-title" lang="en">
<td colspan="2" style="background-color: #fff; color: #202122; text-align: center;">← Older revision</td>
<td colspan="2" style="background-color: #fff; color: #202122; text-align: center;">Revision as of 23:03, 27 January 2025</td>
</tr><tr><td colspan="2" class="diff-lineno" id="mw-diff-left-l14">Line 14:</td>
<td colspan="2" class="diff-lineno">Line 14:</td></tr>
<tr><td class="diff-marker"></td><td style="background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"><div>* 1 (inner): 5V</div></td><td class="diff-marker"></td><td style="background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"><div>* 1 (inner): 5V</div></td></tr>
<tr><td class="diff-marker"></td><td style="background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"><div>* 2 (middle): GND</div></td><td class="diff-marker"></td><td style="background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"><div>* 2 (middle): GND</div></td></tr>
<tr><td class="diff-marker" data-marker="−"></td><td style="color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #ffe49c; vertical-align: top; white-space: pre-wrap;"><div>* 3 (outer): Output, 15 mV / Amp (1.59V @ 100A)</div></td><td class="diff-marker" data-marker="+"></td><td style="color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #a3d3ff; vertical-align: top; white-space: pre-wrap;"><div>* 3 (outer): Output, 15<ins style="font-weight: bold; text-decoration: none;">.9 </ins>mV / Amp (1.59V @ 100A)</div></td></tr>
<tr><td class="diff-marker"></td><td style="background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"><br/></td><td class="diff-marker"></td><td style="background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"><br/></td></tr>
<tr><td class="diff-marker"></td><td style="background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"><div>Mounting</div></td><td class="diff-marker"></td><td style="background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"><div>Mounting</div></td></tr>
</table>
Martin
https://rv10.org/index.php?title=Current_Sensors&diff=3874&oldid=prev
Martin at 00:36, 25 January 2025
2025-01-25T00:36:59Z
<p></p>
<table style="background-color: #fff; color: #202122;" data-mw="interface">
<col class="diff-marker" />
<col class="diff-content" />
<col class="diff-marker" />
<col class="diff-content" />
<tr class="diff-title" lang="en">
<td colspan="2" style="background-color: #fff; color: #202122; text-align: center;">← Older revision</td>
<td colspan="2" style="background-color: #fff; color: #202122; text-align: center;">Revision as of 00:36, 25 January 2025</td>
</tr><tr><td colspan="2" class="diff-lineno" id="mw-diff-left-l11">Line 11:</td>
<td colspan="2" class="diff-lineno">Line 11:</td></tr>
<tr><td class="diff-marker"></td><td style="background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"><div>Crimper</div></td><td class="diff-marker"></td><td style="background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"><div>Crimper</div></td></tr>
<tr><td class="diff-marker"></td><td style="background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"><div>* [https://www.digikey.com/en/products/detail/adafruit-industries-llc/1213/8258462 Adafruit SN-28B Crimper] (use smallest diameter opening, floor of pin gets pushed in, lugs bend and fold when pushed into upper part)</div></td><td class="diff-marker"></td><td style="background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"><div>* [https://www.digikey.com/en/products/detail/adafruit-industries-llc/1213/8258462 Adafruit SN-28B Crimper] (use smallest diameter opening, floor of pin gets pushed in, lugs bend and fold when pushed into upper part)</div></td></tr>
<tr><td colspan="2" class="diff-side-deleted"></td><td class="diff-marker" data-marker="+"></td><td style="color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #a3d3ff; vertical-align: top; white-space: pre-wrap;"><div><ins style="font-weight: bold; text-decoration: none;">Pins</ins></div></td></tr>
<tr><td colspan="2" class="diff-side-deleted"></td><td class="diff-marker" data-marker="+"></td><td style="color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #a3d3ff; vertical-align: top; white-space: pre-wrap;"><div><ins style="font-weight: bold; text-decoration: none;">* 1 (inner): 5V</ins></div></td></tr>
<tr><td colspan="2" class="diff-side-deleted"></td><td class="diff-marker" data-marker="+"></td><td style="color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #a3d3ff; vertical-align: top; white-space: pre-wrap;"><div><ins style="font-weight: bold; text-decoration: none;">* 2 (middle): GND</ins></div></td></tr>
<tr><td colspan="2" class="diff-side-deleted"></td><td class="diff-marker" data-marker="+"></td><td style="color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #a3d3ff; vertical-align: top; white-space: pre-wrap;"><div><ins style="font-weight: bold; text-decoration: none;">* 3 (outer): Output, 15 mV / Amp (1.59V @ 100A)</ins></div></td></tr>
<tr><td colspan="2" class="diff-side-deleted"></td><td class="diff-marker" data-marker="+"></td><td style="color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #a3d3ff; vertical-align: top; white-space: pre-wrap;"><div><ins style="font-weight: bold; text-decoration: none;"></ins></div></td></tr>
<tr><td class="diff-marker"></td><td style="background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"><div>Mounting</div></td><td class="diff-marker"></td><td style="background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"><div>Mounting</div></td></tr>
<tr><td class="diff-marker"></td><td style="background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"><div>* Some have made 3D-printed holders for the current sensor, check the links on the [[3D-Printed_Tools_and_Parts]] page. You can also use a size 24 Adel clamp (e.g.[https://www.aircraftspruce.com/catalog/pnpages/MS21919-DG24.php at Spruce]).</div></td><td class="diff-marker"></td><td style="background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"><div>* Some have made 3D-printed holders for the current sensor, check the links on the [[3D-Printed_Tools_and_Parts]] page. You can also use a size 24 Adel clamp (e.g.[https://www.aircraftspruce.com/catalog/pnpages/MS21919-DG24.php at Spruce]).</div></td></tr>
</table>
Martin
https://rv10.org/index.php?title=Current_Sensors&diff=3873&oldid=prev
Martin at 00:32, 25 January 2025
2025-01-25T00:32:59Z
<p></p>
<table style="background-color: #fff; color: #202122;" data-mw="interface">
<col class="diff-marker" />
<col class="diff-content" />
<col class="diff-marker" />
<col class="diff-content" />
<tr class="diff-title" lang="en">
<td colspan="2" style="background-color: #fff; color: #202122; text-align: center;">← Older revision</td>
<td colspan="2" style="background-color: #fff; color: #202122; text-align: center;">Revision as of 00:32, 25 January 2025</td>
</tr><tr><td colspan="2" class="diff-lineno" id="mw-diff-left-l10">Line 10:</td>
<td colspan="2" class="diff-lineno">Line 10:</td></tr>
<tr><td class="diff-marker"></td><td style="background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"><div>* [https://us.rs-online.com/product/molex-incorporated/08-55-0102/70191082/ 22 AWG gold plated 08550102 pins for Molex connector @RS (backordered)]</div></td><td class="diff-marker"></td><td style="background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"><div>* [https://us.rs-online.com/product/molex-incorporated/08-55-0102/70191082/ 22 AWG gold plated 08550102 pins for Molex connector @RS (backordered)]</div></td></tr>
<tr><td class="diff-marker"></td><td style="background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"><div>Crimper</div></td><td class="diff-marker"></td><td style="background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"><div>Crimper</div></td></tr>
<tr><td class="diff-marker" data-marker="−"></td><td style="color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #ffe49c; vertical-align: top; white-space: pre-wrap;"><div>* [https://www.digikey.com/en/products/detail/adafruit-industries-llc/1213/8258462 Adafruit SN-28B Crimper]</div></td><td class="diff-marker" data-marker="+"></td><td style="color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #a3d3ff; vertical-align: top; white-space: pre-wrap;"><div>* [https://www.digikey.com/en/products/detail/adafruit-industries-llc/1213/8258462 Adafruit SN-28B Crimper] <ins style="font-weight: bold; text-decoration: none;">(use smallest diameter opening, floor of pin gets pushed in, lugs bend and fold when pushed into upper part)</ins></div></td></tr>
<tr><td class="diff-marker"></td><td style="background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"><div>Mounting</div></td><td class="diff-marker"></td><td style="background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"><div>Mounting</div></td></tr>
<tr><td class="diff-marker"></td><td style="background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"><div>* Some have made 3D-printed holders for the current sensor, check the links on the [[3D-Printed_Tools_and_Parts]] page. You can also use a size 24 Adel clamp (e.g.[https://www.aircraftspruce.com/catalog/pnpages/MS21919-DG24.php at Spruce]).</div></td><td class="diff-marker"></td><td style="background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"><div>* Some have made 3D-printed holders for the current sensor, check the links on the [[3D-Printed_Tools_and_Parts]] page. You can also use a size 24 Adel clamp (e.g.[https://www.aircraftspruce.com/catalog/pnpages/MS21919-DG24.php at Spruce]).</div></td></tr>
</table>
Martin
https://rv10.org/index.php?title=Current_Sensors&diff=3872&oldid=prev
Martin at 00:30, 25 January 2025
2025-01-25T00:30:28Z
<p></p>
<table style="background-color: #fff; color: #202122;" data-mw="interface">
<col class="diff-marker" />
<col class="diff-content" />
<col class="diff-marker" />
<col class="diff-content" />
<tr class="diff-title" lang="en">
<td colspan="2" style="background-color: #fff; color: #202122; text-align: center;">← Older revision</td>
<td colspan="2" style="background-color: #fff; color: #202122; text-align: center;">Revision as of 00:30, 25 January 2025</td>
</tr><tr><td colspan="2" class="diff-lineno" id="mw-diff-left-l3">Line 3:</td>
<td colspan="2" class="diff-lineno">Line 3:</td></tr>
<tr><td class="diff-marker"></td><td style="background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"><div>Shunts need 1A inline fuses for each of the two current sensor connectors, Hall effect sensors do not.<br>[https://amploc.com/products/key100-open-loop-hall-effect-sensor AMPLOC KEY100 Current Sensor]<br>[[File:2023-03-27 16-03-50.jpg|367x367px]]<br>The Key100 sensor doesn't really have a proper Molex connector, rather it has 3 gold pins that are cut off a wire-wrap pin-header strip plus a plastic glued on that makes it asymmetric for Molex connectors. You need to cut off one of the protruding keys on the Molex connector to make it fit. You also want to scrape off the ledge at the bottom if it is binding there.<br></div></td><td class="diff-marker"></td><td style="background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"><div>Shunts need 1A inline fuses for each of the two current sensor connectors, Hall effect sensors do not.<br>[https://amploc.com/products/key100-open-loop-hall-effect-sensor AMPLOC KEY100 Current Sensor]<br>[[File:2023-03-27 16-03-50.jpg|367x367px]]<br>The Key100 sensor doesn't really have a proper Molex connector, rather it has 3 gold pins that are cut off a wire-wrap pin-header strip plus a plastic glued on that makes it asymmetric for Molex connectors. You need to cut off one of the protruding keys on the Molex connector to make it fit. You also want to scrape off the ledge at the bottom if it is binding there.<br></div></td></tr>
<tr><td class="diff-marker"></td><td style="background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"><div>[[File:2023-03-31 09-46-47.jpg|400x400px]]<br><br></div></td><td class="diff-marker"></td><td style="background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"><div>[[File:2023-03-31 09-46-47.jpg|400x400px]]<br><br></div></td></tr>
<tr><td class="diff-marker" data-marker="−"></td><td style="color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #ffe49c; vertical-align: top; white-space: pre-wrap;"><div>Here is a somewhat compatible Molex connector (needs <del style="font-weight: bold; text-decoration: none;">some </del>mods, see above):</div></td><td class="diff-marker" data-marker="+"></td><td style="color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #a3d3ff; vertical-align: top; white-space: pre-wrap;"><div>Here is a somewhat compatible Molex connector (needs <ins style="font-weight: bold; text-decoration: none;">small </ins>mods, see above):</div></td></tr>
<tr><td class="diff-marker"></td><td style="background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"><div>* [https://www.digikey.com/en/products/detail/molex/0022011032/403289?s=N4IgTCBcDa5gtABgIz2YgzBAugXyA Molex 0022011032 connector housing @Digikey (in stock)]</div></td><td class="diff-marker"></td><td style="background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"><div>* [https://www.digikey.com/en/products/detail/molex/0022011032/403289?s=N4IgTCBcDa5gtABgIz2YgzBAugXyA Molex 0022011032 connector housing @Digikey (in stock)]</div></td></tr>
<tr><td class="diff-marker"></td><td style="background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"><div>* [https://us.rs-online.com/product/molex-incorporated/22-01-1032/70332831/ Molex 0022011032 connector housing @RS (no shipment date)]</div></td><td class="diff-marker"></td><td style="background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"><div>* [https://us.rs-online.com/product/molex-incorporated/22-01-1032/70332831/ Molex 0022011032 connector housing @RS (no shipment date)]</div></td></tr>
<tr><td colspan="2" class="diff-lineno" id="mw-diff-left-l9">Line 9:</td>
<td colspan="2" class="diff-lineno">Line 9:</td></tr>
<tr><td class="diff-marker"></td><td style="background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"><div>* [https://www.digikey.com/en/products/detail/molex/0008550102/172056?s=N4IgTCBcDaIAwA4C0BWFS4EY4QLoF8g 22 AWG gold plated 08550102 pins for Molex connector @Digikey (in stock)]</div></td><td class="diff-marker"></td><td style="background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"><div>* [https://www.digikey.com/en/products/detail/molex/0008550102/172056?s=N4IgTCBcDaIAwA4C0BWFS4EY4QLoF8g 22 AWG gold plated 08550102 pins for Molex connector @Digikey (in stock)]</div></td></tr>
<tr><td class="diff-marker"></td><td style="background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"><div>* [https://us.rs-online.com/product/molex-incorporated/08-55-0102/70191082/ 22 AWG gold plated 08550102 pins for Molex connector @RS (backordered)]</div></td><td class="diff-marker"></td><td style="background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"><div>* [https://us.rs-online.com/product/molex-incorporated/08-55-0102/70191082/ 22 AWG gold plated 08550102 pins for Molex connector @RS (backordered)]</div></td></tr>
<tr><td colspan="2" class="diff-side-deleted"></td><td class="diff-marker" data-marker="+"></td><td style="color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #a3d3ff; vertical-align: top; white-space: pre-wrap;"><div><ins style="font-weight: bold; text-decoration: none;">Crimper</ins></div></td></tr>
<tr><td colspan="2" class="diff-side-deleted"></td><td class="diff-marker" data-marker="+"></td><td style="color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #a3d3ff; vertical-align: top; white-space: pre-wrap;"><div><ins style="font-weight: bold; text-decoration: none;">* [https://www.digikey.com/en/products/detail/adafruit-industries-llc/1213/8258462 Adafruit SN-28B Crimper]</ins></div></td></tr>
<tr><td class="diff-marker"></td><td style="background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"><div>Mounting</div></td><td class="diff-marker"></td><td style="background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"><div>Mounting</div></td></tr>
<tr><td class="diff-marker"></td><td style="background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"><div>* Some have made 3D-printed holders for the current sensor, check the links on the [[3D-Printed_Tools_and_Parts]] page. You can also use a size 24 Adel clamp (e.g.[https://www.aircraftspruce.com/catalog/pnpages/MS21919-DG24.php at Spruce]).</div></td><td class="diff-marker"></td><td style="background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"><div>* Some have made 3D-printed holders for the current sensor, check the links on the [[3D-Printed_Tools_and_Parts]] page. You can also use a size 24 Adel clamp (e.g.[https://www.aircraftspruce.com/catalog/pnpages/MS21919-DG24.php at Spruce]).</div></td></tr>
</table>
Martin
https://rv10.org/index.php?title=Current_Sensors&diff=3855&oldid=prev
Martin at 07:33, 12 January 2025
2025-01-12T07:33:09Z
<p></p>
<table style="background-color: #fff; color: #202122;" data-mw="interface">
<col class="diff-marker" />
<col class="diff-content" />
<col class="diff-marker" />
<col class="diff-content" />
<tr class="diff-title" lang="en">
<td colspan="2" style="background-color: #fff; color: #202122; text-align: center;">← Older revision</td>
<td colspan="2" style="background-color: #fff; color: #202122; text-align: center;">Revision as of 07:33, 12 January 2025</td>
</tr><tr><td colspan="2" class="diff-lineno" id="mw-diff-left-l10">Line 10:</td>
<td colspan="2" class="diff-lineno">Line 10:</td></tr>
<tr><td class="diff-marker"></td><td style="background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"><div>* [https://us.rs-online.com/product/molex-incorporated/08-55-0102/70191082/ 22 AWG gold plated 08550102 pins for Molex connector @RS (backordered)]</div></td><td class="diff-marker"></td><td style="background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"><div>* [https://us.rs-online.com/product/molex-incorporated/08-55-0102/70191082/ 22 AWG gold plated 08550102 pins for Molex connector @RS (backordered)]</div></td></tr>
<tr><td class="diff-marker"></td><td style="background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"><div>Mounting</div></td><td class="diff-marker"></td><td style="background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"><div>Mounting</div></td></tr>
<tr><td class="diff-marker" data-marker="−"></td><td style="color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #ffe49c; vertical-align: top; white-space: pre-wrap;"><div>* Some have made 3D-printed holders for the current sensor, check the links on the [[3D-Printed_Tools_and_Parts]] page.</div></td><td class="diff-marker" data-marker="+"></td><td style="color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #a3d3ff; vertical-align: top; white-space: pre-wrap;"><div>* Some have made 3D-printed holders for the current sensor, check the links on the [[3D-Printed_Tools_and_Parts]] page<ins style="font-weight: bold; text-decoration: none;">. You can also use a size 24 Adel clamp (e.g.[https://www.aircraftspruce.com/catalog/pnpages/MS21919-DG24.php at Spruce])</ins>.</div></td></tr>
<tr><td class="diff-marker"></td><td style="background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"><div>See also</div></td><td class="diff-marker"></td><td style="background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"><div>See also</div></td></tr>
<tr><td class="diff-marker"></td><td style="background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"><div>* [https://vansairforce.net/community/showthread.php?t=179694 this VAF thread]</div></td><td class="diff-marker"></td><td style="background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"><div>* [https://vansairforce.net/community/showthread.php?t=179694 this VAF thread]</div></td></tr>
</table>
Martin
https://rv10.org/index.php?title=Current_Sensors&diff=3467&oldid=prev
Martin at 01:53, 14 May 2024
2024-05-14T01:53:31Z
<p></p>
<table style="background-color: #fff; color: #202122;" data-mw="interface">
<col class="diff-marker" />
<col class="diff-content" />
<col class="diff-marker" />
<col class="diff-content" />
<tr class="diff-title" lang="en">
<td colspan="2" style="background-color: #fff; color: #202122; text-align: center;">← Older revision</td>
<td colspan="2" style="background-color: #fff; color: #202122; text-align: center;">Revision as of 01:53, 14 May 2024</td>
</tr><tr><td colspan="2" class="diff-lineno" id="mw-diff-left-l9">Line 9:</td>
<td colspan="2" class="diff-lineno">Line 9:</td></tr>
<tr><td class="diff-marker"></td><td style="background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"><div>* [https://www.digikey.com/en/products/detail/molex/0008550102/172056?s=N4IgTCBcDaIAwA4C0BWFS4EY4QLoF8g 22 AWG gold plated 08550102 pins for Molex connector @Digikey (in stock)]</div></td><td class="diff-marker"></td><td style="background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"><div>* [https://www.digikey.com/en/products/detail/molex/0008550102/172056?s=N4IgTCBcDaIAwA4C0BWFS4EY4QLoF8g 22 AWG gold plated 08550102 pins for Molex connector @Digikey (in stock)]</div></td></tr>
<tr><td class="diff-marker"></td><td style="background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"><div>* [https://us.rs-online.com/product/molex-incorporated/08-55-0102/70191082/ 22 AWG gold plated 08550102 pins for Molex connector @RS (backordered)]</div></td><td class="diff-marker"></td><td style="background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"><div>* [https://us.rs-online.com/product/molex-incorporated/08-55-0102/70191082/ 22 AWG gold plated 08550102 pins for Molex connector @RS (backordered)]</div></td></tr>
<tr><td colspan="2" class="diff-side-deleted"></td><td class="diff-marker" data-marker="+"></td><td style="color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #a3d3ff; vertical-align: top; white-space: pre-wrap;"><div><ins style="font-weight: bold; text-decoration: none;">Mounting</ins></div></td></tr>
<tr><td class="diff-marker"></td><td style="background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"><div>* Some have made 3D-printed holders for the current sensor, check the links on the [[3D-Printed_Tools_and_Parts]] page.</div></td><td class="diff-marker"></td><td style="background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"><div>* Some have made 3D-printed holders for the current sensor, check the links on the [[3D-Printed_Tools_and_Parts]] page.</div></td></tr>
<tr><td class="diff-marker"></td><td style="background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"><div>See also</div></td><td class="diff-marker"></td><td style="background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"><div>See also</div></td></tr>
</table>
Martin