View source for 3D-Printed Tools and Parts

See also section [[CAD_CAM_Files]] if you have a CNC machine.<br>Consider joining the [https://www.facebook.com/groups/756340465159308 3D Printed Aircraft Parts] FB group.

* [https://rv10.ca/3d-printed-stuff Les Kearney's Collection of 3D printed parts for the RV-10]
* [https://airplane.allanglen.com/2023/06/03/wing-conduit-pitot-lines/ Allan's wing conduit and pitot line bracket]
** [[Media:Clip1.stl|STL File with pitot]]
** [[Media:Clip2.stl|STL File without pitot]]
* [https://drive.google.com/file/d/124eUTspTteT3eSmWlmUzsF4OzDb2fDbg/view Shawn's wing conduit and pitot line bracket]
* [https://www.facebook.com/groups/vansrv10/posts/7818292061625158 FB thread on printing wing conduit brackets]
* [https://cad.onshape.com/documents/28e162780853ae01d2449fc7/w/77b48e08ba9e75cb5a2f2404/e/5defbb712e11954dd46be040?renderMode=0&uiState=65701d7093369b20157bb23c Oil Cap with center hole for engine dehumidifier]
* [https://cad.onshape.com/documents/0159cc595215647fc8f45331/w/6914ca0c1b9d022497358ed8/e/389b1411feea7cc07574cb03?renderMode=0&uiState=66430c2824a2832b7668f30c Conduit holder with variable tilt angle]
* [https://www.printables.com/model/716806-rv-air-vent-caps Front RV-10 vent plug]
* [[Media:OM-ELA RV-10 compass holder 3d file.stl|Glareshield strut compass holder (stl file), credit Igor, VAF member supik]]
* [https://www.facebook.com/groups/vansrv10/posts/8381169962004029 FB thread on avionics fan controller enclosure]<br>[[Media:Fan controller enclosure V1.stl|Fan controller enclosure V1.stl]]<br>[[Media:Fan controller lid V1.stl|Fan controller lid V1.stl]]
* Current Sensor mount by Rodrigo<br>[[File:Screenshot 2024-10-21 at 4.48.26 PM.png|200x200px]]
** [[Media:Mount - Part 1.stl|Mount - Part 1]]
** [[Media:Mount - Part 2.stl|Mount - Part 2]]
* Current Sensor mount for AWG 2 cable by Martin. Uses 3 cable ties to hold the parts and cable together.<br>Onshape Project: [https://cad.onshape.com/documents/7216c1faeed2cb0b42673e0e/w/3e17c5f97999a5ccffcda201/e/2bd458bbefbbbbd84091e10c?renderMode=0&uiState=6810da33d1248a63de0d3bfb current_sensor_mount]<br>[[File:Cur6.png|200x200px]][[File:cur6p.jpeg|200x200px]][[File:cur6p2.jpeg|200x200px]]
** [[Media:Cur6a.stl|Mount - Part 1]]
** [[Media:Cur6b.stl|Mount - Part 2]]
** [[Media:Cur6c.stl|Mount - Part 3]]

* End cap for armrest<br>[[File:Screenshot 2025-02-16 at 4.25.49 PM.png|300x300px]]<br>[[File:Arm rest cap.jpg|300x300px]]<br>[[Media:Center Console - armrest endcap.stl|End Cap stl file]]
* Door hinge alignment jig. Print 2 of these and snap them to the bottom of WD-1018 in lieu of the three .125 scrap aluminum pieces for spacing (see 45-06 step #3).<br>[[File:Door Alignement Jig.jpg|300px]]<br><br>[[File:Hinge Jig In Use.jpg|300px]]<br>[[Media:Hinge Bracket Jig STL file.stl|Hinge alignment jig STL file]]
* Headset hanger<br>[[File:Screenshot 2025-09-18 at 6.49.08 AM.png|300px]]<br>[[Media:Headset Hanger.stl|Headset Hanger stl file]]

[[Category:Optional]]
* Throttle quadrant handle<br>[[File:throttlehandle.jpg|300px]]<br>[[Media:RV-10 Throttle Handle.stl|Throttle Handle stl file]]
[[Category:Optional]]